Qingdao Teste Metal Products Co., Ltd.
Qingdao Teste Metal Products Co., Ltd.
Add to Cart
SAE 1006 (according to ASTM A510M) steel is commonly used in manufacturing rolled wire with subsequent drawing and no prior or subsequent heat-treatment. Its chemical composition allows for a high level of zinc adhesion to the steel base and provides ideal conditions for the production of galvanized and rolled wire.
Weldable steel wire in coils for thin drawing. Material according to ISO 16120- 2 C4D, ASTM A510M - SAE1006 and EN 10025-2 S235JR standards.
GRADE
| Steel Wire Rod | Standard | Grade |
| ASTM A510M |
SAE 1006 SAE 1008 SAE1010 SAE 1012 SAE 1013 SAE 1015 SAE 1016 SAE 1017 SAE 1018 SAE 1020 SAE 1022 SAE 1023 |
|
| DIN EN ISO 16120-2 |
C32D C38D C42D C48D C50D C52D C56D C58D C60D C62D C66D C68D C70D C76D C78D C80D C82D C86D C88D C92D |
EQUIVALENT GRADE OF SAE 1006
|
USA |
Germany DIN |
China GB |
Japan JIS |
Spain(UNE) | UK(BS) | Italy(UNI) |
| 1006,SAE1006 | CK5/D5-2/D6-2/DG-2 | Q195 | SWRM6 | AP04 | 1CR,2CR | 3CD5,3CD6 |
CHEMICAL COMPOSITION
| Element | C | Mn | P | S | Si |
| SAE 1006 | 0.06%Max | 0.45%Max | 0.04%Max | 0.05%Max | 0.12%Max |
| SAE 1008 | 0.10%Max | 0.30~0.50% | 0.04%Max | 0.05%Max | - |
MECHANICAL AND DIMENSIONAL PROPERTIES
Tensile Strength : 380<Rm[MPa]≤420
Yield Strength : ReMPa]≥235
Elongation : A10[%]≥30
Elongation : A5[%]≥32
Diameter : 5.5mm~20mm
Diameter Tolerance and out-of -round : According to ASTM510M
WELDING
SAE 1006 low-carbon structural steel is ductile and not prone to brittleness or fragility. Any convenient welding method can be used: argon-arc non-consumable electrode, manual continuous electrode, and submerged argon-arc electrode with protection. Preheating and subsequent heat-treatment are not necessary.
SURFACE AND INTERNAL QUALITY
Surface quality: according to ISO 16120-2 par. 4.3 and 4.4 – maximum defect depth 0,20 mm.
Internal quality: absence of defects compromising use (ISO 16120-2 par. 4.5).
STANDARD PACKING
In coils up to approx. 2500 kg, inside diameter about 800 mm, outside diameter about 1200 mm, maximum length 1900 mm.
STANDARD CERTIFICATION
On demand Inspection Certificate according to EN 10204 3.1 and for diameter range 5,5 ÷ 13 mm the Declaration of Performance according to CPR (Reg UE 305/2011).